|
Insulex
WHAT IS IT?
Insulex is a self-supporting, Styrofoam® laminated panel. Our PLAS-TEX® is
permanently bonded to blue extruded polystyrene foam with insulating value.
This lightweight panel is rigid and can be quickly and easily installed by
one person.
|
FEATURES
|
BENEFITS
|
|
R5/inch insulation value
|
Finished interior wall with insulation in one
easy-to-install panel
|
|
Foam up to 4" thick
|
Customize insulating value to suit your needs
|
|
Plastic accessories
|
Moldings reduce heat transfer, panel joints, and fastening
locations
|
|
Attachable to pre-stressed concrete, cement block or
existing wall
|
SS-95 provides ahesion to multiple surfaces and does not
attack Styrofoam
|
|
100% Waterproof
|
Non-absorbent: no swelling, rotting, or water
discoloration
|
|
Fiberglass free
|
No irritating, harmful fiberglass dust
|
|
Available in several colors and textures, including
decorative surfaces
|
Easy to match décor of room
|
TYPICAL
APPLICATIONS
Insulex is used in
agricultural, commercial, and residential locations where insulation is
important but moisture is a problem and cleanliness is an issue.
 Field
applications include:
- Cold
Storage
- Cellars
- Commercial
Freezers
- Foundation
Insulation
- Basement
Panels
- Garage
Panels
- Inserts for
Steel Garage Doors
INSTALLATION
INFORMATION
Install directly over studs or unfinished walls with mechanical fasteners
or Parkland's SS-95 adhesive. Reinforce panels with rivets. Precondition
panels and moldings for 24 hours at the final temperature in the room to be
applied. Silicone caulking applied in molding channels ensures waterproof
barrier. Allow 72 hours for adhesive to cure.
LOW MAINTENANCE
Maintenance is simple
with a clean rag and any household cleaner. The PLAS-TEX®
laminate on Insulex is unaffected by most corrosive chemicals. Do not use
abrasive cleansers.
PRODUCT RANGE
|
Sizes:
|
|
Thicknesses:
|
1/2", 1", 1 1/2", 2", 4"
|
|
Widths:
|
up to 4'
|
|
Lengths:
|
up to 14'
|
|
In Stock:
|
1" x 48" x 96"
2" x 48" x 96"
|
Texture:
 Cracked-Ice/Pebbled
Matte
(available as special order)
Smooth
(available as special order)
Colors:
Bright White
Almond
(available as special order)
|
Accessories:
Matched PVC
moldings - varies based on thickness
(1", 2"
gap)
Nylon rivets -
varies based on thickness
(1 1/2" to
6")
Recommended
Adhesives:
|
|
